Categories: Evaporator Treat-51
Product Short Description: Highly effective liquid antifoam formulated for controlling foaming and priming in seawater distillation plants compatible with most antiscalants
Product Description:

Antifoam Defoamer Elite M8 is a highly effective liquid product formulated to control foaming and priming in seawater distillation plants. Antifoam Defoamer Elite M8 has proven effectiveness during many years use in distillation plants throughout the world.

Antifoam Defoamer Elite M8 for Seawater Desalination systems or other aqueous systems by RXSOL is a high-performance antifoam formulation based on a synergistic blend of modified alcohols and polymerised glycol ethers, specifically developed to control foam formation in seawater intake, pretreatment, and desalination systems.

The product rapidly collapses existing foam while providing extended foam suppression in seawater streams containing natural organic matter, algae-derived surfactants, hydrocarbons, biological contaminants, and suspended solids. The combination of fast-acting antifoam component and persistent foam-control properties of the polymerised glycol ether delivers both immediate knockdown and long-lasting antifoam performance.

 

The product is designed for continuous or intermittent injection into seawater make-up lines to minimize operational problems associated with foaming in desalination plants.

Product Application:

The foaming tendency of seawater in distillation plants is unpredictable. It is generally thought that foam is formed when organic compounds are concentrated in the brine, giving rise to surface active effects which increase the liquid film strength at phase interfaces. Antifoam Defoamer Elite M8 is not soluble in water. At use concentrations (0.05 - 0.1 mg/l) Antifoam Defoamer Elite M8 forms a micro-emulsion and during evaporation is incorporated into the surface liquid film of bubbles where it acts as a surfactant and reduces the film strength. The result is that the film readily ruptures and a stable foam does not form. In this way a uniform boiling or flashing action is achieved and carry-over is minimised.

Where to use ANTIFOAM DEFOAMER ELITE M8 for foam knockdown?

Desalination Plants
  • Reverse Osmosis (RO) Plants
  • Multi-Stage Flash (MSF) Plants
  • Multi-Effect Distillation (MED) Plants
  • Hybrid Desalination Facilities
Seawater Systems
  • Intake Channels
  • Seawater Make-up Lines
  • Pumping Stations
  • Equalization Basins
  • Clarifiers
  • Dissolved Air Flotation (DAF) Units
  • Pretreatment Systems
Industrial Water Systems

 

  • Power Plant Cooling Water Intakes
  • Refinery Seawater Systems
  • Petrochemical Facilities
  • Offshore Platforms
  • LNG Terminals
Product Dose:
Antifoam Defoamer Elite M8 can be used to control foaming in all types of seawater distillation plant and is particularly suitable for use in multi-stage flash plants. Antifoam Defoamer Elite M8 is a formulated product containing ethylene oxide / propylene oxide block copolymer. As such it is not soluble in water but readily forms a stable emulsion at concentrations up to 1% w/w in distillate. Antifoam Defoamer Elite M8 is typically dosed as a 1% w/w emulsion in distillate prepared as follows:
  • Add 50% - 70% of required distillate volume into dosing tank;
  • Start the dosing tank agitator/mixer;
  • Add the required Antifoam Defoamer Elite M8 volume into the dosing tank;
  • Add the remaining volume of distillate to give the required concentration of Antifoam Defoamer Elite M8 solution;
  • Continue agitation for a further 10 - 15 minutes;
  • The resulting emulsion will be stable and will not normally separate

Dosing for Desalination plants/aqueous systems of Antifoam Elite M8

Actual dosage requirements depends upon:
  • Organic loading
  • Algal concentration
  • Turbulence level
  • Intake water quality
  • Seasonal variations
Application Condition Recommended Dosage of Elite M8
Normal Operation 0.5 - 5 ppm
Moderate Foaming 2 - 10 ppm
Severe Foaming 5 - 20 ppm
Shock Treatment 10 - 50 ppm
Product Note:

Key Features and Benefits

  • Quick foam knockdown - particularly useful when foam suddenly builds up in the absorber and rapid control is needed.
  • Excellent stability at high temperatures - because of their excellent dispersibility. Antifoam Defoamer Elite M8 do not show a propensity to deposit on heat exchangers as many other antifoams tend to. Instead, they remain finely dispersed in the amine or glycol solution and are eventually filtered out.
  • Easy dilution and use - simple addition of water and minimum agitation is sufficient to dilute RXSOL-16-2066-200 antifoam emulsion to required concentrations. Pumping of the diluted emulsions is easy, due to their low viscosity.
  • Reduced clogging or scaling in the heat exchangers - potentially resulting in less service maintenance.
  • Low concentrations can provide effective foam control - RXSOL-16-2066-200 Antifoam Defoamer Elite M8 emulsion and often two to three times more effective than other antifoams used in treating units.

Product Safety, Handling and Storage

Customers should review the latest Material Safety Data Sheet (MSDS) and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS are available at www.rxmarine.com or, upon request, from any RX MARINE INTERNATIONAL representative. For product storage and handling procedures to maintain the product quality within our stated specifications, please review Certificates of Analysis, which are available in the Order Center.

Comarision to Antifoam Defoamer (Silicone based)

Antifoam AF10 (RXSOL-51-2066) Antifoam Defoamer (Silicon based)
Rapid dispersion Moderate
Lower fouling tendency Higher fouling risk
Easier dilution Difficult
Better seawater compatibility Good
Lower deposit formation Moderate
Suitable for continuous dosing Excellent
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates