Product code RXSOL-33-8936-009
Antimicrobial used for reverse osmosis water treatment to Eliminate most microbial growth Stable, broad spectrum
Isothiazolinone based ProShield PC55 RO Biocide bactericide an antimicrobial and preservative used in a wide variety of applications, such as bactericide for reverse osmosis water treatment.
Application
For Shut Down longer than as 24 hrs, Biological growth in the RO system should be controlled. This requires the introduction of a chemical to kill bacteria and prevent growth. Any Preservation chemical would then have to be rinsed out from the system when it is restarted.
Dosage
Flow Rate during flushing should be based on the recommended cleaning instruction flow rates. This is normally 30-40 gpm ( 6.8 to 9.1 m3/ Hr ) per pressure vessel.
Flushing time should be long enough for the conductivity out to equal the conductivity in. Typically 15 - 20 minutes.
If the permeate flush is unavailable, feed water can be used by allowing low pressure water to replace the water within the system by delaying the inlet valve closing. Scale inhibitor should be turned off during the permeate flush.
if the temperature in the RO Membrane system more then 115 degree fahrenheit, flush water should be continiously passed through the system to prevent memebrane degradation.