Product code RXSOL-81-8206-025
SUPERFOAM DRILLING FOAM RXSOL is a biodegradable mixture of surfactants and foam stabilizer which has been formulated as a foaming agent fresh, brackish and sea water for various drilling operations.
Foam PLUS is an upgraded concentrated premium anionic surfactants which has been formulated for use in the oil & gas, mineral and water well drilling engineering.
Application
SUPERFOAM DRILLING FOAM RXSOL may be used in a variety of drilling operations. Oil Well Drilling, ranging from simple air drilling to stiff foam drilling where the foam is reinforced by the use of polymers.
Superfoam Drilling foam FOAM PLUS is a upgraded concentrated premium anionic surfactants which has been formulated for use in the oil & gas, mineral and water well drilling engineering.
Dosage
DRILLING FOAM RXSOL concentration may vary depending on the specific drilling system and equipment used. However for air drilling, drill foam can be used as an effective dust suppressant, at 0.1 - 0.2% by volume in injection water. For normal drilling condition, foam can be used as 0.5-1% by volume in injection water.
DRILLING FOAM RXSOL can be mixed in water tank and introduced into the airstream. A foam injection pump with nozzle can be used. The foam drill concentration may vary depending on the specific drilling system and equipment used. Use water as clean as possible to mix to prevent fines and dirt from damaging or blocking suction-line filters of the small parts and passages of the foam pump.
SuperFoam Drilling Foam for Oil and Gas Recommended Treatment:
Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
- Air drilling: 0.1-0.2%
- Mist Drilling: 1.0%-2.0%
- Stiff foam drilling: Mix Drilling Foam, 0.1-0.2% as foam stabilizer or 0.2-0.4%, Drilling Foam Foam Plus 1.0-1.5%
Technical Specifications
| Parameter | Test Method | Unit | Result |
| pH @ 25°C (1% Solution) | METS IP 81 | – | 7.36 |
| Determination of Biodegradability | METS IP-80 | % | 90.37 |
| Specific Gravity @ 25°C | Measurement | – | 1.0467 |
| Solubility | Visual/Gravimetric | – | Soluble |
| Viscosity @ 20°C (Spindle-2, Speed-60 rpm, Torque-74%) | Viscometer | cP | 603 |
| Non-Volatile Content | Gravimetry | % | 10.77 |
| Foam Generation (1% Solution with Fresh Water) | Gravimetry/Volumetry | mL | 530 |
| Foam Stability (1% Solution with Fresh Water) | Gravimetry/Volumetry | Sec | 205 |
| Salt Tolerance (1% Solution with 5% NaCl) - Foam Generation | Gravimetry/Volumetry | mL | 360 |
| Salt Tolerance (1% Solution with 5% NaCl) - Foam Stability | Gravimetry/Volumetry | Sec | 212 |
| Thermal Stability - Foam Generation | Gravimetry/Volumetry | mL | 510 |
| Thermal Stability - Foam Stability | Gravimetry/Volumetry | Sec | 170 |
Heavy Metal Test Report of Superfoam Drilling Foam Liquid
| Parameter | Test Method | Unit | Result |
| Lead (Pb) | METS IP 76 | ppm | ND |
| Arsenic (As) | METS IP 76 | ppm | ND |
| Cadmium (Cd) | METS IP 76 | ppm | ND |
| Mercury (Hg) | METS IP 76 | ppm | ND |
| Antimony (Sb) | METS IP 76 | ppm | ND |
ND: Not Detected