Categories: Corrosion Inhibitor-44
Product Short Description: Powerful concentrated corrosion inhibitor acts as oxygen scavengers used to effectively remove dissolved OXYGEN
Product Description:

Oxygen Scavenger – Sodium Sulphite

Product Description:

Oxygen Scavenger – Sodium Sulphite is a highly effective oxygen scavenging chemical formulated to remove dissolved oxygen from boiler feed water, injection water, and industrial water systems. It rapidly reacts with dissolved oxygen, preventing corrosion in pipelines, boilers, heat exchangers, storage tanks, and water injection systems.

The product is widely used in the oil & gas, power generation, petrochemical, refinery, and water treatment industries to maintain low dissolved oxygen levels and protect critical equipment from oxygen-induced corrosion.

Product Application:

Applications

  • Boiler Feed Water Treatment

  • Water Injection Systems

  • RO Permeate Treatment

  • Condensate Systems

  • Industrial Water Treatment

  • Oil & Gas Production Facilities

  • Power Plants

  • Petrochemical Industries

Product Dose:

Key Features

  • Rapidly removes dissolved oxygen from water.

  • Prevents corrosion in boilers and water injection systems.

  • Protects pipelines, heat exchangers, and storage tanks.

  • Improves equipment reliability and service life.

  • Suitable for high-pressure and low-pressure boiler systems.

  • Easy to dose and compatible with most water treatment programs.

  • Reduces maintenance and operating costs.

Product Note:

BENEFITS -

RAPID REACTION :

The catalyst RXSOL-81-6119-220 speeds up the removal of dissolved oxygen. Oxygen can be removed completely even from cold water due to catalytic action. Normal reaction time is as low as 15 to 20 seconds as against 10 to 30 minutes for uncatalysed sulphite.

EASY TO HANDLE :

RXSOL-81-6119-220 is a free flowing powder. It is soluble in water even at lower feed water temperature.It is non-toxic and non-corrosive and, therefore, can be handled easily.

pH CONTROL :

RXSOL-81-6119-220 is formulated to get proper pH control for optimum availability of catalyst for rapid oxygen removal.

COST EFFECTIVE :

The catalytic action reduces the excessive requirement of sulphite in feed water for the rapid removal of oxygen. Thus the quantity required is lower, making RXSOL-81-6119-220 treatment cost effective.

APPLICATION AND DOSAGE :

RXSOL-81-6119-220 solution should be dosed continuously. Dissolve the required quantity of RXSOL-81-6119-220 gently in boiler feed water in a separate tank. Dose this solution continuously in the boiler feed water line after the deaerator.

Above 8 ppm of sodium sulphite is required for the removal of 1 ppm of dissolved oxygen from boiler
feed water. About 10% to 20% of excess sulphite should be dosed to provide oxygen consuming reserve.

The table below gives the approximate dosage.

Feed Water Temperature RXSOL-81-6119-220 dosage in gms per ton ofsteam generation

More than 80oC		 15
60 to 80oC 30
40 to 60oC 60
Less than 40oC 100

The rmax will provide technical assistance in arriving at optimum dosages for your operating conditions and requirements and in selecting a suitable dosing system for your plant

Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates