Categories: Cooling Water Chemical-43
Product Short Description: Highly effective scale inhibitor for open cooling water systems. High molecular weight polymer for excellent dispersion as well as scale inhibitor in cooling systems
Product Description:

Scale Inhibitor for Open Cooling Water Systems is a high-performance liquid antiscalant and dispersant specially formulated for open recirculating cooling water systems operating under high hardness and high pH conditions.

The product effectively prevents deposition of:
  • Calcium Carbonate (CaCO₃)
  • Calcium Sulphate (CaSO₄)
  • Iron deposits
  • Suspended solids fouling
 
It works through a combination of threshold inhibition, crystal distortion, and dispersion mechanisms, ensuring maximum heat transfer efficiency and system reliability.
Product Application:

Scale Inhibitor for Cooling Water Systems

Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost-effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost-effective RO antiscalants will inhibit a wide range of foulants including calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.

RO Antiscalants are dosed directly to the RO feed water tank or feedwater line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase. 

A high-performance Antiscalant for RO systems formulated to prevent scale formation and fouling on membrane surfaces. It effectively controls calcium carbonate, calcium sulfate, barium, and strontium scales, even at high recovery rates. The product maintains optimal membrane performance and extends RO membrane life. Suitable for brackish water, seawater, and wastewater reclamation RO systems.

Useful in following scale inhibition treatment

  • Open recirculating cooling water systems
  • Cooling towers
  • Evaporative condensers
  • Industrial heat exchangers
  • HVAC cooling circuits
  • Power plants
  • Petrochemical & refinery cooling systems
Product Dose:
Dosing Guidelines: 

The typical dosage range is between 2 to 5 ppm or Typical dosage range is between 2 and 6 mg/L.

Dilution:

This product is formulated to be injected neat. However, if a dilution is required, use demineralized or RO permeate water. If neither of these is available, softened water may be substituted. The dilution for Scale Inhibitor should not result in a solution strength of less than 10%. This guidelin will protect the effectiveness of the internal bacteriostat which inhibits bacterial growth in the drum and feed tank.Maximum dilution is temperature related as shown below.
Temperature, °C     Maximum Dilution, %
<30                                        12
30-35                                     25
>35                                        50

Product Note:

Key Features and Benefits of ANTISCALANT RO Reverse Osmosis

  • Inhibit scale formation and effectively controls corrosion

  • Protects the membrane efficiently

  • Can be used neat or diluted

  • Enhance the plant operation and equipments life span

  • Tolerant to oxides of iron, aluminium etc

  • Economical

  • Compatible with almost all RO membranes

  • Easy in usage and handling

  • Excellent results as a replacement for softener filters

  • Highly effective for scale prevention from calciumcarbonate, calcium sulfate, barium sulfate, and strontium sulfate

  • Cleans the membrane surface by dispersing foulants

  • Works on wide range of pH

  • Powerful scale prevention – Inhibits a wide range of inorganic scales.
  • Membrane compatible – Safe for all polyamide thin-film composite membranes.
  • Enhanced system efficiency – Reduces cleaning frequency and downtime.
  • Wide pH and temperature tolerance – Performs reliably under variable operating conditions.
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates